StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Critical Review of ASET and RSET Principle - Coursework Example

Cite this document
Summary
"Critical Review of ASET and RSET Principle" paper delves into the requirements of B1 of the building regulations with the intent to review the principle of ASET RSET and how it is incorporated into the standard UK guidance. Sample calculations from BS7974 are given in this paper…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER96.7% of users find it useful

Extract of sample "Critical Review of ASET and RSET Principle"

CRITICAL REVIEW OF ASET AND RSET PRINCIPLE By Student’s name Course code and name Professor’s name University name City, State Date of submission Introduction The tenability of occupants in any given fire situation is always affected by the three factors namely temperature, visibility and toxicity. Pursuant to BS9794, the evaluation of fire safety for buildings is mandatory when it comes to design. The modern trends emerging in any upcoming legal document tends to establish a quantitative performance on the metrics involved in this important topic. Inasmuch as this form of quantification is necessary in achieving alternative strategies, there is need to review the strategies that have been in existence since the inception of this important topic. In order to provide fire safety to the occupants, design engineers have over the last few decades been able to base their arguments on safety depending on when and where the ignition started. This quantification process utilises the correctness in calculating the fixed time required for safe escape in order to ensure that occupants are kept safe in case of fire eventuality. The much discussed concept is referred to as the Required Safe Egress Time (RSET), also defined within the BS9794 as “the time available between ignition of fire and the time at which occupants in a specified space in a building are able to reach a place of safety.” Considering that the building is well equipped with safety facilities, trivial calculations have been made to achieve the available safe egress time (ASET). ASET is described within document BS9794’s jurisdiction as the “time available between ignition of a fire and the time at which tenability criteria are exceeded in a specified space in a building.” Diagram 1 and 2 below indicate the schematics behind ASET and RSET principle. Figure 1: A schematic presentation of the RSET principle (Shah, 2012). Figure 2: A schematic presentation of the ASET principle where; (Shah, 2012). This article delves into the requirements of B1 of the building regulations with intent to review the principle of ASET RSET and how it is incorporated to the standard UK guidance. In order to understand this principle further, sample calculations from BS7974 are given herein with the ensuing discussion and analysis indicating the applicability of this important sensation. Document B1 Requirements According to document B1, the rules and regulations of escape design and warning is mandatory and is therefore to be included in the building designs. This section gives a detailed approach to the construction fraternity regarding the provisions for warning the occupants when it comes to fire catastrophes. The upcoming and existing engineering designs should therefore be tailored in a way to ensure safe egress to prescribed areas outside the building. The class of materials used in the escape channels should also be fire retardant – a point that has been stressed in approved document B. The document also requires a proper risk analysis to be carried out before the design phase is carried out. This eliminates all the possible risks that occupants may face in terms of escape when a fire arises. Apart from materials, the major methodological approaches that are utilised by building design engineers with respect to ASET RSET are required to take into consideration the use and structure of the building so as to maximize when it comes to resolving this issue. The document goes further and allows for projections on erratic risks posed on occupants to be made by competent persons involved in the design (Office of the Deputy Prime Minister, 2000). The regulations of this document give a thorough approach to the dangers that are related to the safety of occupants. While fire may not occur at once in two different areas of a building, it has been established that in most popular cases the hazards generated start circulating immediately. Areas with furnishings such as living rooms, bedrooms, offices etc. are very prone to fires as compared to the building structure itself. The fundamentals that are generated by the principles contained in Approved document B 2000 give clear analytics on each and every stage of fire development. This is then followed by the survival heights at which noxious smoke is considered to be of low fatality levels. This owes to the levels of poisoning that actually occur from time to time in the causalities that have been investigated prior to the development of this report. The RSET principle therefore gives the smoke detector industry a design approach in order to give early warnings in case of such threats (Office of the Deputy Prime Minister, 2000). The RSET ASET principles give the designers the capability of designing buildings for safe egress through analytics carried out using real time data. The methodology and design is approved for various building classes, materials and rate of occupancy in order to give an allowable factor of safety. The mode of entrance and exit/ numbers of exits and entrances are also detailed in this document in terms of the allowable levels. In complementing approved document B, Avilo and Kirsch (2010) point out that the types of passages are detailed in this document with provisions on how dead ends should be dealt with for purposes of achieving RSET and ASET. The equipment to be used as enhancements for RSET and ASET are included as portable ladders, lifts and any other apparatus that can be manipulated in order to achieve high levels of safety. The safety adequacy must be approved by the law for any equipment that is to be used for egress under the local bylaws. Design calculations for both secure and unsecured escape roots should be critically analysed by design engineers in order to assure occupants of individual protection. The unprotected routes are should however be limited in order to prolong ASET and also to reduce the distant that the occupants travel in case of emergency as a way of reducing exposure to danger. Long escape routes should also be provided with alternative means e.g. by increasing number of doors in order to guarantee protection (Office of the Deputy Prime Minister, 2000). For ease of evacuation, RSET ASET principle has been designed in a way to ensure that all the requirements of document B1 are met. When it comes to control efficiency for exit and entry zones, the doors are designed in accordance to building occupancy. This reduces loss of lives considerably by ensuring maximum evacuation in case of an emergency. According to Poon (2014), during the design stage, it is required that the resolution of these matters be addressed with authorities concerned for further approval. The most important part is that the artificial detection or alert system must be availed by all means necessary. In cases of dwelling houses, the alert systems should be availed for both smoke and heat with fully working/ approved mechanisms. The sensitivity of such gadgets should be vetted in order to ensure that all the gaps that appear in the RSET ASET time are catered for. The sensitivity indicated in the approved document calls for open area mounting since air circulation is considered to be high (Office of the Deputy Prime Minister, 2000). The means of escape also depends on the type of building in question since you cannot have the same scenario when it comes to evacuating occupants of a multi-storeyed building as compared to single storeyed one. In addressing the RSET ASET principle, the provisions in document B are suggested to be increased in a direct proportional margin. Protected stairways are mandatory with a possibility of an alternative route in every storey so as to increase the evacuation margin. It is also stated that dwelling houses which contain more than one storey be provided with separation by using the fire resistant class of building materials. Apart from the building alert systems, sprinkler systems must be availed in each area suspected to have a fire outbreak (Office of the Deputy Prime Minister, 2000). How is ASET RSET Incorporated in to Standard UK Guidance? In relationship to RSET ASET principle, guidance B1 mentions the early warning by installing systems meant for this action and provision of safe egress into a designated area while seeking redress for the affected. According to Babraukas et al. (2010), the assumptions that statutory rules and regulations make is that, while the only time an individual required for marching robotically to the optimal exit the RSET must contain the three components which are incorporated in equation (1) below. (1) Where; is referred as the recognition phase which is meant to be used in investigating traits such as the (coping phase used in firefighting) and which is the escape phase. This methodology is approved by the British Standards 7974-6:2004 (2004), due to safety that it instils in a manner that both physical and economic setbacks of this catastrophe are addressed. RSET ASET has the best applicability but is also performance based depending on the industry of application. For single family houses for example, same recommendations are given as would be given for a storeyed office building in order to avoid counterproductive documentation. The performance of approved document B is enough prove that RSET ASET provides sufficient means of warning the occupants to keep clear. Since RSET ASET are conceptualised with a major concern to address the time between a catastrophe and time of raising alarm, the technical document has gone further to give a breakdown of which materials should be used for every kind of job, how wide doors should be designed and so on. The tenability of a building has been noted to be affected by such factors as carbon concentration, visibility standards which must be maintained at 10m and above and temperature levels (Reax Engineering Inc., 2014). Countering these three features is made possible by ensuring that all the parameters in equation (1) above are analysed in an in-depth manner. So, for every building that is designed and constructed within the jurisdictions of the United Kingdom, this principle must be adhered to. RSET ASET is kept into consideration in order to ensure that the provided regulations are meeting the incorporation threshold. It is possible to determine the levels of safety by using the RSET ASET principle as well as the approved document B owing to its incorporation (Purser, 2013). These have further triggered the schematics contained in the approved document based on these principles and at the same time provide a wide coverage to ensure that the occupants are secured. The installation of warning and notification systems is majorly based on RSET ASET which is a strong indication of its incorporation. The temporal factors of safe egress according to Klingsch et al. (2008) are also considered in coming up with the notification systems. These are directly linked with the considerations made in coming up with the equation highlighted in (1) as a way of ensuring safety. Approved document B gives the designers a breakdown of the pre-movement time actual evacuation and finally the travelling time involved in safe egress. The snapshot below shows the relationship of factors affiliated with RSET ASET and the way they are associated with each other. Figure 3: Factors associated with ASET RSET principles (British Standards 7974-6:2004, 2004). RSET ASET Sample Calculations According to British Standards 7974-6:2004 (2004), the prediction of RSET ASET times requires an estimation of time concentric curves of the major determinants of tenability. The times required for escape entirely depend on subsequent detections, warning and other parameters which may differ in accordance to the nature of the building. These parameters are classified into two broad categories which include pre-movement and travel behaviour. This however is not the major concern of this section thus the adherence to the major factors highlighted in the figure 3 above. From the above diagram we deduced that the margin of safety is the difference between ASET and RSET as shown in equation (2) below. (2) The elements contained in equation (1) may further be expanded for purposes of understanding RSET in a general perspective as shown in the equation (3) below. (3) Where refers to the time from ignition to the time that detection occurs. is the time from when the fire is detected to the time when a general alarm is triggered. this refers to the time required for pre-movement of the building occupants. is the travel time required for the occupants to be evacuated. Assuming that a warehouse with two bays has caught fire and the valley and gutter ridges of the roof are 12m and 13m respectively. We are able to calculate the ASET RSET times given the dimensions of the building as 60m by 40m. Let us say that an object has been placed at the centre of the warehouse for purposes of testing and is expected to burn at the rate. For purposes if a successful experiment, only the door ventilations are opened as in a practical example of fire outbreak. An assumption is given that two thirds of the heat produced shall be circulated throughout the plume. If the evacuation period is period given for such a state is 3 minutes then calculations may be done as follows in accordance to BS7974 so as to achieve the respective ASET and RSET. Substituting the values above in the following equations contained in BS7974; (4) Where equation (4) above is a fire spread rate of 150. (5) (6) (7) (8) Carrying out the calculations by substituting the values in the above equations we note that the plume height has to be assumed as constant. The smoke layer is therefore depicted to be increasing in a ration that is direct proportional to the plume height. The required time for smoke to spread to a level of 5m above the floor is calculated as 5.45 minutes. The time required for smoke to spread to 2m above the floor becomes 8.15 minutes. It is assumed that incoming air dilutes the smoke thereby reducing it to penetrable levels. The time needed for smoke to spread to a level of 5m above the floor is gotten as 8.9 minutes and 11.67 minutes to reach the 2m level. This makes it easier for an occupant caught up by fire in the building to escape with ease. It is therefore possible for safe egress during the first 3 minutes of fire ignition at a maintainable temperature of 34˚C. Discussion, analysis and conclusions It is important to note that the fire fraternity has achieve such high level of intelligence in ensuring life safety. By recognizing the time required for safe egress, design engineers have eliminated hazardous designs that are likely to cause destruction of property and life. According to Ng and Chow (2006), the evacuation components have to be understood well in order to define the RSET and ASET times well in establishing the safety margins. It has been established that a timeline of events determine life safety thus thorough calculations must be carried out in accordance to the prevailing standards in order to come up with designs that are practicable. These factors are also reflected effectively through a wide literature coverage which definitely gives a breakdown of information that may help design and engineers in establishing the best designs that are not only aesthetic but also tenable buildings. List of References Avillo, A. & Kirsch, J., 2010. Fire Engineering's Study Guide for Firefighter I and II. Tulsa, Oklahoma: Fire Engineering Books. Babrauskas, V., Fleming, J. M. & Russell, B. D., 2010. RSET/ASET, a flawed concept for fire safety assessment. Fire and Materials, p. Pp. 341–355. British Standards 7974-6:2004, 2004. The application of fire safety engineering principles to fire safety design of buildings — Part 6: Human factors: Life safety strategies — Occupant evacuation, behaviour and condition (Sub-system 6), London: British Standards Institute. Klingsch, W. W., Rogsch, S. & Schreckenberg, M., 2008. Pedestrian and Evacuation Dynamics 2008. Wuppertal: Springer. Ng, C. M. & Chow, W., 2006. A brief review in timeline concept in evacuation. International Journal on Architectural Science, 7(1), pp. pp. 1-13. Office of the Deputy Prime Minister, 2000. Fire Safety: Approved Document B, London: Office of the Deputy Prime Minister. Poon, S. L., 2014. A Dynamic Approach to ASET/RSET Assessment in Performance based Design. Procedia Engineering, Volume 71, p. Pp. 173–181. Purser, D., 2013. ASET and RSET: addressing some issues in relation to occupant behaviour and tenability. Garston, Watford, Fire Safety Science - Proceedings of the seventh international symposium. Reax Engineering Inc., 2014. ASET/RSET Analysis. [Online] Available at: http://reaxengineering.com/services/fire_protection_engineering/ASET_RSET.html [Accessed 24 November 2014]. Shah, F., 2012. Fire Safety Engineering: The Performance-Based Approach, London: Exova Warringtonfire. Read More

The class of materials used in the escape channels should also be fire retardant – a point that has been stressed in approved document B. The document also requires a proper risk analysis to be carried out before the design phase is carried out. This eliminates all the possible risks that occupants may face in terms of escape when a fire arises. Apart from materials, the major methodological approaches that are utilised by building design engineers with respect to ASET RSET are required to take into consideration the use and structure of the building so as to maximize when it comes to resolving this issue.

The document goes further and allows for projections on erratic risks posed on occupants to be made by competent persons involved in the design (Office of the Deputy Prime Minister, 2000). The regulations of this document give a thorough approach to the dangers that are related to the safety of occupants. While fire may not occur at once in two different areas of a building, it has been established that in most popular cases the hazards generated start circulating immediately. Areas with furnishings such as living rooms, bedrooms, offices etc.

are very prone to fires as compared to the building structure itself. The fundamentals that are generated by the principles contained in Approved document B 2000 give clear analytics on each and every stage of fire development. This is then followed by the survival heights at which noxious smoke is considered to be of low fatality levels. This owes to the levels of poisoning that actually occur from time to time in the causalities that have been investigated prior to the development of this report.

The RSET principle therefore gives the smoke detector industry a design approach in order to give early warnings in case of such threats (Office of the Deputy Prime Minister, 2000). The RSET ASET principles give the designers the capability of designing buildings for safe egress through analytics carried out using real time data. The methodology and design is approved for various building classes, materials and rate of occupancy in order to give an allowable factor of safety. The mode of entrance and exit/ numbers of exits and entrances are also detailed in this document in terms of the allowable levels.

In complementing approved document B, Avilo and Kirsch (2010) point out that the types of passages are detailed in this document with provisions on how dead ends should be dealt with for purposes of achieving RSET and ASET. The equipment to be used as enhancements for RSET and ASET are included as portable ladders, lifts and any other apparatus that can be manipulated in order to achieve high levels of safety. The safety adequacy must be approved by the law for any equipment that is to be used for egress under the local bylaws.

Design calculations for both secure and unsecured escape roots should be critically analysed by design engineers in order to assure occupants of individual protection. The unprotected routes are should however be limited in order to prolong ASET and also to reduce the distant that the occupants travel in case of emergency as a way of reducing exposure to danger. Long escape routes should also be provided with alternative means e.g. by increasing number of doors in order to guarantee protection (Office of the Deputy Prime Minister, 2000).

For ease of evacuation, RSET ASET principle has been designed in a way to ensure that all the requirements of document B1 are met. When it comes to control efficiency for exit and entry zones, the doors are designed in accordance to building occupancy. This reduces loss of lives considerably by ensuring maximum evacuation in case of an emergency. According to Poon (2014), during the design stage, it is required that the resolution of these matters be addressed with authorities concerned for further approval.

The most important part is that the artificial detection or alert system must be availed by all means necessary. In cases of dwelling houses, the alert systems should be availed for both smoke and heat with fully working/ approved mechanisms.

Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Critical Review of ASET and RSET Principle Coursework Example | Topics and Well Written Essays - 2500 words, n.d.)
Critical Review of ASET and RSET Principle Coursework Example | Topics and Well Written Essays - 2500 words. https://studentshare.org/engineering-and-construction/2052821-principle-of-aset-and-rset
(Critical Review of ASET and RSET Principle Coursework Example | Topics and Well Written Essays - 2500 Words)
Critical Review of ASET and RSET Principle Coursework Example | Topics and Well Written Essays - 2500 Words. https://studentshare.org/engineering-and-construction/2052821-principle-of-aset-and-rset.
“Critical Review of ASET and RSET Principle Coursework Example | Topics and Well Written Essays - 2500 Words”. https://studentshare.org/engineering-and-construction/2052821-principle-of-aset-and-rset.
  • Cited: 0 times
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us